The VMD202 Driveway Open Sensor
The VMD202 vehicle motion detector senses moving ferrous metal within its magnetic field. It has a detection range up to 12 feet at a minimum speed of 5 mph. A plug-in sensitivity remote finely tunes the VMD202 to fit any installation requirement and then easily detaches to prevent unwanted changes or tampering. The settings are stored in a non-volatile memory, saving them in case of power failure. The VMD202 accepts a wide range of power inputs from 9-41 VDC or 6-29 VAC and features a low current consumption (250uA standby / 12 mA activated) making it ideal for solar applications.
It is a compact, single-piece vehicle motion detector that operates by detecting changes in the earth’s magnetic field that occur near the probe. It has a detection range up to 12feetat a minimum speed of 5 mph. The VMD202 will only detect a moving vehicle and will not detect a stationary vehicle. Itmay be used as a free exit sensor to allow gates to open and guests to exit without the use of a key fob or pass code. The VMD202may also be wired to notify a home automation system or security system that a vehicle is moving down a driveway. This vehicle motion detector features a detachable sensitivity remote
Features
- 100ft lead wire
- Wide power supply options 6-41 VDC or 6-29 VAC
- Probe assembly and wire are water tight and direct burial compatible
- Harness is pre-wired onto lead wire for easy installation
- Settings are placed in a non-volatile memory in case of power failure
- Accepts wide range of power inputs from 9 – 41 VDC or 6 – 29 VAC
- Low current consumption of 250uA standby and 12mA activated